Air Rotor Oil Spray

Description

Air Rotor Oil Spray

The KaVo Spray system helps your daily surgery routine without environmental damage.  The spray lubricant is propelled to exactly the right areas where lubrication is regularly required.  It’s important to dry the excess oil off of it after its finished. To lubricate the high speed handpiece, inject lubricant into the smallest of the two large holes until it’s lightly pours out. Before reusing it, attach it to your dental unit and run it for approximately 10 seconds.

Thanks to the KaVo QUATTROcare Plus maintenance system, KaVo sets standards of efficiency for handpieces care. The complete care procedure for four handpieces, only takes approx. one minute. This means that when they are in contact with hard material, the speed will drop by as much as 40% due to the resistance or hardness of the material being cut. Electric motor handpieces rotate at around 200,000 rpm and have high torque, which translates into smooth movement through hard materials.  Place a few drops of lubricant into the drive air hole of the handpieces and run the handpiece on slow speed until the only lubricant comes out of the head. T

Oil Spray

It best used oil spray for cleaning and lubricating all handpiecs , contra angles and turbines.

Working Instructions:

• Hold the Can in Vertical position
• Lubricate prior to every sterilization

Caution:

• Pressurized container
• Do not expose to temerature above 50 degree C