Description
Voco Arabesk Flow Caps Light Curing Glass Ceramic Microhybrid Composite 3g Dent
Voco Arabesk Flow Caps Light Curing Glass Ceramic Microhybrid Composite 3g Dent. Light-Curing Ready For Use Gic Dental Cement Ndt Tech Dent. Light-curing ready-for-use glass ionomer composite cement. As a one-component material, Ionoseal is ready to use and can be quickly as well as hygienically applied. Due to its low viscosity the material can be placed in the prepared cavity even better and poorly accessible areas can be wetted more easily, saving time.
VOCO has developed a non-running, non-dripping syringe based on the innovative non-dripping technology (NDT) especially for highly flowable materials. This means a procedure that is not only safe and clean, but also economical.
As a one-component material, Ionoseal is immediately ready to use and can be quickly as well as hygienically applied in the new NDT syringe. Flowable light-curing glass-ceramic microhybrid composite with BCS* filler structure.
- For fillings of more than 2 mm, apply and polymerise in layers (cure each layer for approx. 40 – 60 s).
- The light output should be a minimum of 500 mW/cm2 on halogen polymerisation devices and 300 mW/cm2 on LED devices.
- Care should be taken to ensure good marginal adaption.
- Hold the light source of the halogen light as close as possible to the surface of the filling. If the distance is more than 5 mm, the curing depth may compromise. Polymerisation may be limited to the area of the cone of light only.
- Insufficient curing can lead to discolouration and pulp irritation.
- During finishing and polishing the filling must be cooled.
Reviews
There are no reviews yet.