Dmg Silagum Comfort Starter Kit

Dmg Silagum has been known for years as a proven and reliable impression material based on VPS. Each single product of the Silagum line is characterized by its exceptional material properties and ease of use. Silagum’s hydrophilicity and thus improved wettability yields a pinsharp reproduction of subgingival areas.

From Handmix over automatically mixing to fully automatic mixing with the MixStar system, products are available in a wide variety of application forms. Silagum offers the right solution for any technique and use.

Excellent recovery after deformation

Due to its high elasticity, Silagum exhibits a very good recovery after deformation, i.e. an extremely low compression set.

It is also this high elasticity that makes removal from the mouth so easy. Any deformation that occurs upon removal safely recovers, thus ensuring precise dimensional reproduction.

Very good hydrophilicity

Thanks to its high surface wettability, Silagum provides optimum adaptation to the tooth substance and mucous membrane in the moist oral environment.
Together with the highly flowable viscosity, this enables precise reproduction of subgingival areas. This results in pinsharp impressions, even of the finest details*.

COMPOSITION :-

• Composition Addition-cured vinyl polysiloxanes, hydrogen polysiloxanes, fillers, pigments, additives, platinum catalyst.

DIRECTIONS TO USE:-

• Apply at least two coats. Apply Silagum-Comfort first on the ridges and edges of the denture and then on the base of the denture. The layers should be at least 2 mm thick.
• Remove saliva with a suction instrument. Caution! Uncured silicone can trigger the patient’s gag reflex.
• Using a brush, apply the Silagum-Comfort Varnish to the treated areas in accordance with the manufacturer’s instructions, avoiding air bubbles as much as possible, and then let dry.

CONTENTS:-

• 1 x 50ml cartiridge with 4 automix tips.
• 1 x 5 ml Bottle Primer.
• 2 x 10 ml Bottle Varnish.