Itena Dentotemp – Long Term Temporary Cement

Itena Dentotemp – Long Term Temporary Cement

Itena Dentotemp – Long Term Temporary Cement. DentoTemp can be mixed with a small amount of petroleum jelly to reduce its retention A Furrer plier is particularly adept to removing temporary elements DentoTemp binds to the inside of the temporary crown. Resealing the temporary element is easy with the addition of extra DentoTemp For a temporary cementation on a composite restored tooth, isolate the core.

Clinical procedure 5 Immediately seat the crown 6 Final cement setting and the proximal contacts; complete all finishing procedures temporary crown is clean and dry. Apply the mixed cement directly into the temporary crown. Working time: 45-60s and hold in place. Initial set: 90-120s, characterized by a distinct rubbery phase. During that phase, the excess can be easily removed using an explorer or periodontal probe dispense equal quantity of base and catalyst onto a mixing sheet. Mix thoroughly with a spatula for 20 to 30s References DentoTemp manual syringes 2 syringes of 10 ml.

For cementation of temporary prosthesis (long term – until 8 months) or permanent cementation of implant-retained crowns and bridges.

Advantages :

• No eugenol – No interferences with permanent cements
• High bonding strength, but with an easy removal
• Leaves perfectly healthy gingiva after removal of the temporary crown
• Binds to the inside of temporary crowns: the removal of the temporary crown takes off all of the cement
• Nothing left to remove on the natural tooth and the prepared teeth stay perfectly clean
• Rebasing and cementation in one stage
• Thin film – Very aesthetic result
• Radiopaque

Indications :

For temporary cementation in case of:

– A small retention area

– A long-term trial Permanent cementation of implant-retained crowns